FC-EM300
Cutting light

Channel mode: 20/22CH;
Light source: LED 300W;
Service life: 20000 hours; Luminous flux of light source: 22000;
Power supply: AC110-240V, 50/60Hz;
Power: 360W; Power factor: PF ≥ 0.95;
Optics: output mirror 90mm;
Display: 2.8 inch color LCD LCD display screen, capable of reversing 180 °;
Color dial: yellow and white light
Color temperature, 3200 and 5600K; Color index 90
Note: The color temperature can be increased by replacing the display finger according to special requirements. If the display finger is selected, the color chip will be reduced by one piece;
Electronic soft light: linear atomization function;
Light output angle: 13-26 ° linear amplification;
Focusing: Electronic linear focusing function;
Cutting: Four piece full process graphic cutting module, which can switch graphics according to scene requirements, and the graphics can be enlarged, reduced, and focused;
Dimming: 0-100% electronic dimming, supporting electronic strobe and adjustable strobe effects, and supporting strobe macro function;
Retrieve and reset the magnetoelectric positioning system, with higher accuracy and reliable performance;
Horizontal: 540 °, resolution 8/16Bit;
Vertical: 270 °, resolution 8/16Bit;
Built in RDM function, supporting console modification of address codes;
Bulb control: Electronic light on and off, linear brightness adjustment, start ECO power reduction mode after 8 seconds of closing the gate;
IP protection level: IP20;
Product size: 282x220x560mm
Net weight: 14.5 KG;
Gross weight: 16.5 KG (carton packaging)